slide
Products Garment Testing Equipments Button Snap Pull Tester

Button Snap Pull Tester

Button Snap Pull Testers

The assessment of snap attachment strength is an important criterion especially in the design and manufacturer of garments for infants and children wear. The measurement of an uniform force applied to the snap attachment shall be recorded by means of a force- measuring device. Once the appropriate force is registered on the Imada Scale, a stopclock is used for recording set period of time.

Instruments Name & Purpose
Upper Universal Grip Upper Universal Grip

Test for female part of snap & male part of stud.

Lower Fabric Clamp & Level Arm Locking Lower Fabric Clamp & Level Arm Locking

Fix the samples with button firmly, flatly & constantly so that the fabric slippage can be minimized.

Calibration Weight 15LB Calibration Weight 15LB

Routine checking the accuracy of the imada Force Gauge (15LB = 6.82kg).

Upper Stud Grip Upper Stud Grip

Test for male part of baby snaps but generally Upper Universal Snap Grip can also be applied instead.

Lower Grasp Button Accessory Kit Lower Grasp Button Accessory Kit

Convert the original lower fabric clamp for testing the grasp buttons or larger buttons to 30 ligne and it is mainly used together with STA – 005.

Multifunction Vise Clamp Multifunction Vise Clamp

Fix the garment between the jaw faces and will use with other upper grip for testing other attachments such as Patch, Side Tab, Zipper Puller etc.

Three Pronged Grip Three Pronged Grip

Test for four-hole buttons & Jeans buttons.

Small Part Cylinder - Plastic Small Part Cylinder - Plastic

To test whether the garment accessories are classified as "Small Part" or not in accordance with EN71 & ASTM F963.

Torque Test Kit Torque Test Kit

The kit is used to evaluate the component of baby / toy products (e.g. zipper puller) whether can be easily detached through torque.

Goggles Goggles

To protect the eye of Operator.

Button Impact Tester Button Impact Tester

This tester is used to evaluate the durability and integrity of a button after being subjected to an impact force which is more realistic than that of ASTM. It covers the measurement of impact energy absorbed by the button. A Steel ball in a pipe at a specified height is dropped on to the button.

ASTM Zipper Test Kit ASTM Zipper Test Kit

To define the garments manufacturer responsibility and duties to ensure that zips are applied appropriately to all garments. To prevent separation between the scoop (interlocking teeth of a zipper) and the stringer (zipper fabric where the scoop is attached), also to ensure no separation occurs from the pull of the zipper. These factors represent a dangerous situation if any loose part is consumed by an infant. This test kit can be used with UTM as well as Safeguard stand installed with Multi - function Vise.

Small Parts Cylinder - Metal Type or Plastic Type Small Parts Cylinder - Metal Type or Plastic Type

This helps to determine if accessory of toys or garments is too small that may cause choking to children.

Sharp Point Tester Sharp Point Tester

This tester is used to identify the accessible point that may cause an unreasonable risk of injury to children. Unlike others, standard package includes for both EN & ASTM tests.

Sharp Edge Tester Sharp Edge Tester

This tester can identify if accessible edge may cause an unreasonable risk of injury to children skin. The tester can be firmly mounted on the table & can be turned on through its tool - switch so that small specimen can be held stably by both hands together for tests.

Imada Force Gauge FB – 30 K Imada Force Gauge FB – 30 K

Display the reading of pulling force with capacity up to 30 kg.

Upper Long Nose Vise Grip Upper Long Nose Vise Grip

Mainly used for trouser hooks and other smaller accessories.

[Our Instrument comes with Calibration certificate traceable to NPL / NABL, Warranty certificate and detailed user manual].